Products

Corresponds to the original air filter in size and filtration performance. Fits only the original air box.

Complete airbox. Contains airbox, air filter element and connector hose with a connector ring for the carburettor. Suitable for all Chinese 4-strok...

Complete airbox. Contains airbox, air filter element and connector hose with a connector ring for the carburettor. Suitable for all Chinese 4-strok...

Foam air filter element suitable for changing at service intervals. The filter fits in the original airbox

Naraku double-layer air filter element for original air boxes. For standard or lightly-tuned engines. Check the product image to ensure you get the...

Air filter for original air box. In contrast to the original filter, this air filter is soaked in oil, which results in optimised filtering of air ...

Naraku puller for alternator magnet wheels. Screws onto the existing rotor thread and is tensioned with the tensioning bolt. Light taps with a hamm...

Magneto rotor for alternator Version 1. There are currently 2 different versions of the alternator. Version 1 has a white main connector and 2 cabl...

Alternator with cable connector/plug and Pick-up sensor. These alternators are currently available in 2 different versions. The difference is the i...

Alternator with cable connector/plug and Pick-up sensor. There are currently 2 different versions of this alternator. The difference is the insulat...

Pressure-activated petrol tap with M16 thread for GY6 scooters with metal tanks. Delivery also includes the small pre-filter pipe that sits in the ...

Vacuum-operated fuel tap for various Kymco and SYM scooters. Securing nut thread: M16x1.5mm Only for scooters with metal fuel tanks!!! OEM-quality.

Pressure-activated petrol tap for 50cc Chinese scooters with plastic tanks (e.g. New models of the Rex RS and Peugeot V-Clic) and most Chinese 4-st...

Standard brake line for front disc brakes which are factory fitted. Suitable for all vehicles with front brake discs. Length: 92cm, meaning it can ...

Front steel-braided hoses for disc brakes. Steel braided hoses are brake hoses, surrounded by a woven steel jacket. The advantage over rubber lines...

Front steel-braided hoses for disc brakes. Steel braided hoses are brake hoses, surrounded by a woven steel jacket. The advantage over rubber lines...

Original brake lever for rear brake discs (left-hand brake lever). Suitable for all rear disc brake lever fittings. For added assurance, please che...

Original brake lever for rear drum brakes (left-hand brake lever). Suitable for all new rear drum brake designs, where the switch element is not in...

Original brake lever for rear brake discs (left-hand brake lever). Suitable for all old rear drum brake designs with integrated switch element. For...

Original brake lever for rear drum brakes (left-hand brake lever). Suitable for all new rear drum brake designs, where the switch element is not in...

Original brake lever for rear brake discs (left-hand brake lever). Suitable for all old rear drum brake designs with integrated switch element. For...

Original brake lever for front brake discs Suitable for all front disc brake designs. For added assurance, please check the image and compare with ...

Original brake lever for front brake discs in chrome. Suitable for all front disc brake designs. For added assurance, please check the image and co...

Timing chain for GY6 50cc engines 139QMB/QMA.

Timing chain guide for GY6 50cc engines 139QMB/QMA. This guide sits opposite the chain tensioner and is positioned between the cylinder and the cyl...

Timing chain tensioner guide for GY6 50cc engines 139QMB/QMA.

Complete timing chain tensioner for 50cc GY6 4-stroke engines. Tensioner gasket not included and should be ordered separately.

Timing chain tensioner gasket for 139QMB/QMA.

Standard camshaft for 50cc 139 QMB/QMA engines as originally factory- fitted.

Adjustable carburettor needle with clip.

Air cut-off valve. This valve sits on the side of the carburettor and richens the mixture somewhat to avoid the engine running too lean. Needle is ...

Air cut-off valve. This valve sits on the side of the carburettor and richens the mixture somewhat to avoid the engine running too lean.

Screw for air cut-off valve and choke plate.

Plastic carburettor cap for all GY6 4-stroke 50cc scooters 139 QMB/QMA

Screw for plastic carburettor cap with collar.

Dragster racing technology. The venture (funnel-shaped) air ducts optimize the airflow to the carburettor and accelerates the volume of air being t...

Carburettor membrane with slide and adjustable carb needle. Various CVK carbs of the same basic construction are installed on 4-stroke vehicles. Th...

Carburettor membrane with slide and adjustable carb needle. Various CVK carbs of the same basic construction are installed on 4-stroke vehicles. Th...

Carburettor diaphragm for original carburettors fitted to the Chinese imported 4 stroke scooters with the 139QMA/QMB. This said, there are still nu...

Rubber float bowl gasket for all original and Naraku NK200.01 carbs for GY6 50cc engines 1239 QMB/QMA.

Metal float bowl with accelerator pump. Suitable for all original and Naraku NK200.01 carbs for GY6 50cc engines 129 QMB/QMA.

Float bowl screw with locking ring.

Standard Naraku carburettor floats for GY6 50cc 139 QMB/QMA.

Float bearing pin.

Float needle valve.