Aragon

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Naraku Sports Contra Spring V.2 +1000 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better r...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Cylinder studs including special nuts with M7 thread for securing the cylinder. Set of 4 with nuts. Length: 110mm, nuts are 13mm in length and have...

Star washer, mounting/fixing shim for the front belt pulley. The original is not very robust and often breaks. As such, we offer this replacement i...

Naraku HD (Heavy Duty) crank main bearing set. Set contains left and right in metal cage crank bearings and relevant shaft seals. Only bearings wit...

Exhaust manifold gasket for scooters and mopeds with original and tuning/sports exhaust systems with round metal gaskets and dimensions of approx. ...

High-torque 70cc NARAKU cylinder kit with 12mm gudgeon pin. This cylinder kit is not designed to be revvy, but rather it shows its strengths in the...

Good quality 17.5mm carburettor from Naraku for Piaggio engines. Great alternative to those expensive top end brands with no compromise on quality...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

The NARAKU 50cc cast iron cylinder kit is an affordable and robust alternative for those who require a replacement due to cylinder or piston damage...

Naraku small end bearing [HD-Quality] - 12x16x13. Suitable for Minarelli and CPI, Generic, Keeway, Chinese-built 2-stroke engines with 12mm gudgeon...

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 Pack, +1000, +1500, +2000 rpm The current version of the Naraku counter pressure spring uses a modified alloy sprin...

Naraku Sport-o racing clutch. Solid sports clutch that engages 1500-2000 rpm higher than standard, meaning better drive and traffic light starts. K...

Twist Control: an absolute drive innovation from Naraku. Twist Control absorbs the torsion from the torque driver and even out the loss of power fr...

Cost-effective 17.5mm carb from Naraku for Minarelli and Minarelli-based engines (Chinese versions) and horizontal Peugeot engines. Leaves nothing ...

Many scooters from the middle East use different types of carburettor. The carb is a Mikuni copy, but uses an E-choke/cold start valve. You can onl...

Complete transmission kit of Naraku components, all tuned to another. Since Chinese-built scooters are not kitted with top-end components out of th...

Complete set of quality crank oil seals from Naraku, for scooters with Chinese-built, Minarelli-based 2-stroke engine (engine code 1E40QMB). Set co...

NARAKU high-quality belts. High grip combined with good flex minimise friction losses and transmit the engines power to the road. One of the best b...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

3 Set of sliders for the Naraku HS and HS-Racing variators for scooters with Minarelli and CPI engines.

High-quality replacement piston for the 70cc original and 70cc NARAKU cylinder kits for Minarelli 1E40QMB engines with 12mm gudgeon pin. Delivered ...

Naraku Sports Contra Spring V.2 +200rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better res...

Structurally, the original V-belt pulley with a star-shaped carrier is an inferior component. The star shim is just too thin for the forces acting ...

This replacement pulley for standard motors corresponds in shape and dimensions to the original and provides an inexpensive alternative when pulley...

Naraku racing CDI for all CPI, Keeway, Longjia, Generic and Minarelli-based Chinese-built engines with a double connector. Simply swap for the orig...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower opera...

Naraku Sports Contra Spring V.2 2 Pack, +1000, +1500 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring pro...

NARAKU sports variator for 2-stroke CPI, Keeway, Generic models, as well as all Chinese Minarelli-based replica engines. When calibrated, this vari...

Naraku CNC-machined racing clutch bell. This new generation Naraku clutch bell competes with the MHR Malossi and Polini Evo bells. Distortion is al...

Naraku Racing Intake V.2 including 2 adapters for all common carburettors. The 23mm adapter is suitable for all Dellorto 10-21mm and Arreche 17-21m...

Naraku heavy-cheeked HPC racing crank increases the pre-compression in the cases for improved filling. The extra inertia improves performance and t...

Great quality Naraku crank for Euro 2 Minarelli replica Chinese-built engines. Corresponds to the original crankshaft dimensions. 16mm crank shaft ...