Generic

Pressure-activated petrol tap with M16 thread for GY6 scooters with metal tanks. Delivery also includes the small pre-filter pipe that sits in the ...

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Naraku V.3 carburettor 18.5mm for 50cc 4-stroke scooters. Top quality at an affordable price. No start issues as with Chinese alternatives and good...

Very low-cost intake manifold for derestricting the inlet port. This increases the size of the opening to 21mm. This is a must when using a larger ...

Malossi piston ring set for all 70cc Malossi sports cylinder for Minarelli and Morini AC + LC engines. Suitable for all 70cc Malossi pistons with 2...

NGK is one of the world’s leading spark plug manufacturers. As the factory-fitted choice of many vehicle brands, NGK is there when the spark star...

E-choke mounting plate.

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Complete steering bearing sets including bearing races, ball bearings and locknuts. Bearing set for 27mm fork bridge.

Naraku Sports Contra Spring V.2 +1000 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better r...

Aftermarket carburettor for all 2-stroke scooters with 1E40QMB engines. Minarelli replica air-cooled. Comes with electric choke. Note: In rare case...

39mm clutch nut M28x1 (central nut under the clutch bell). Suitable for Minarelli, Kymco, Peugeot, Honda engines and many more.

Kickstarter wheel [carrier] for upright and horizontal Minarelli and Minarelli-based 2-stroke engines as found in CPI, Keeway, Mawi, Longija etc.

Speed Belt by Polini. This v-belt features an aramid weave that makes it elastic and highly durable. Without doubt, one of the best v-belts in our ...

NARAKU V.2 intake manifold for 50cc GY6 and all GY6-based models, as well as Honda Monkey and Monkey replica engines. Unlike the original part, whi...

Everyday 10 inch tubeless tyre for almost any road conditions and great value for money! This is a true allrounder, offering good grip from its dee...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Cylinder studs including special nuts with M7 thread for securing the cylinder. Set of 4 with nuts. Length: 110mm, nuts are 13mm in length and have...

Complete aftermarket carburettor for 4-stroke scooters, with choke. The carburettor is factory-fitted on all 50cc 4-stroke Kymco scooters and many ...

New style oil filler bolt for Minarelli - Red

Complete oil pump for Minarell-based 2-stroke engines from CPI, Keeway, Generic, Mawi, Longija etc. Delivery as shown. Also suitable for Adly 50cc ...

Star washer, mounting/fixing shim for the front belt pulley. The original is not very robust and often breaks. As such, we offer this replacement i...

Twist Control: an absolute drive innovation from Naraku. Twist Control absorbs the torsion from the converter and even out the loss of power from t...

Naraku HD (Heavy Duty) crank main bearing set. Set contains left and right in metal cage crank bearings and relevant shaft seals. Only bearings wit...

Solid luggage rack for all scooters with less robust factory-fitted items, allows for a good quality top box to be fitted. Black, fixings bolts not...

Complete 19mm aftermarket carburettor (membrane type) with E-choke and jetting. Ready to mount; suitable for 50 and 80cc 4-stroke engines. This is ...

This Variator sleeve replaces the original factory fitted sleeve and collar. This lifts the restricted power. The scooter will be capable of approx...

Exhaust manifold gasket for scooters and mopeds with original and tuning/sports exhaust systems with round metal gaskets and dimensions of approx. ...

Low-cost dropping resistor for the lighting system of various 50, 125 and 150cc GY6 4-stroke Kymco and Chinese-built scooters. (5 Watt / 5 Ohm &...

The rectifier/controller changes the voltage from the alternator into the DC for the on board computer, 12V, and keeps the voltage within a certain...

Replacement taillight for various Cagiva, Italjet, Rieju, Voxan, MBK and Yamaha. models. Matches the dimensions of the original. Matches OEM-No.: 8...

High-torque 70cc NARAKU cylinder kit with 12mm gudgeon pin. This cylinder kit is not designed to be revvy, but rather it shows its strengths in the...

Rotor puller for removing the alternator flywheel. Our list is based on experience, but you are best to measure threads prior to ordering. Attentio...

High-quality, precision complete gasket set from Spanish gasket specialists Artein Gaskets. The materials are carefully matched to the specific dem...

The NARAKU crossover combines Racing design with an internal structure that is tailored to the requirements of 4-stroke engines. Road legal thanks ...

Valve cover gasket [rubber] - GY6 50ccm