Hyosung

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Malossi piston ring set for all 70cc Malossi sports cylinder for Minarelli and Morini AC + LC engines. Suitable for all 70cc Malossi pistons with 2...

Naraku small end bearing [HD-Quality] - 10x14x13. Suitable for Minarelli and Morini engines with 10mm gudgeon pin.

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

These Speed-up shims influence the length of the variator sleeve. Lengthening can improve acceleration and shortening can increase top end speed. M...

Float bowl gasket for Keihin PWK carburettor.

NARAKU sports variator for Morini engines. When calibrated, this variator provides good acceleration at higher top speeds. The restriction of the o...

OEM quality small end bearing (10x14x13mm) by the Portuguese manufacturer Top Racing. Suitable for use in original and slightly tuned engines.

Twist Control: an absolute drive innovation from Naraku. Twist Control absorbs the torsion from the torque driver and even out the loss of power fr...

The big brother of the 50cc cylinder kit: the Airsal 70cc is a high torque sports cylinder with great low down power. Delivery includes: gasket set...

Air filter for original air box. In contrast to the original filter, this air filter is soaked in oil, which results in optimised filtering of air ...

The Tecnigas Next-R is a well-proven and all-round exhaust for 50cc or 70cc sport cylinders. This exhaust has a good performance yield at relativel...

Snap ring for Turbo Kit silencer with removable db killer.

Yasuni replacement silencers fits in black anodized aluminium construction for Yasuni Z exhaust systems. The silencers comes with gasket and nuts. ...

NG Brake discs for motorcycles, scooters, quads and ATVs, as used by over 30 top manufacturers from Europe and Japan as factory-fitted items. All d...

24mm connector boot for Arreche carbs with clamping flange.

23mm connector boot for Arreche carbs with clamping flange.

Naraku cylinder head studs for Piaggio cylinders. Great as a replacement for broken or damaged studs. Individual stud. The stud is 110mm long with ...

Counterpressure spring mounting tool for convertor units up to 125mm outer diameter.

Scooter tyre innertube with 90° bent valve for easier pressure checks. Our Tip: Always replace the innertube when changing the tyre. Suitable for ...

Little end bearings for Minarelli/Morini engines with 10mm gudgeon pins.

Naraku Sports Contra Spring V.2 2 Pack, +1000, +1500 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring pro...

Naraku HD (Heavy Duty) crank main bearing set. Set contains left and right crank bearings in metal cage and relevant shaft seals. Only bearings wit...