Kymco

Pressure-activated petrol tap with M16 thread for GY6 scooters with metal tanks. Delivery also includes the small pre-filter pipe that sits in the ...

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Naraku V.3 carburettor 18.5mm for 50cc 4-stroke scooters. Top quality at an affordable price. No start issues as with Chinese alternatives and good...

This regulator is similar to the NARAKU ignition coil. The controller reaches a significantly higher output than the standard controller by ensurin...

Vacuum-operated fuel tap for various scooters with Piaggio engines. Fitment diameter in tank: 15mm

NGK is one of the world’s leading spark plug manufacturers. As the factory-fitted choice of many vehicle brands, NGK is there when the spark star...

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Complete front left indicator, orange. With E-certificate. Suitable for all Chinese-built 4-stroke vehicles in the same design as the REX RS450, Ba...

39mm clutch nut M28x1 (central nut under the clutch bell). Suitable for Minarelli, Kymco, Peugeot, Honda engines and many more.

Quick and simple replacement lever for broken or damaged clutch or brake levers. 100% match of the original shape, colour and mount. Single brake l...

Complete front left indicator, orange. With E-certificate. Suitable for all Chinese-built 4-stroke vehicles in the same design as the REX RS450, Ba...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Complete aftermarket carburettor for 4-stroke scooters, with choke. The carburettor is factory-fitted on all 50cc 4-stroke Kymco scooters and many ...

Twist Control: an absolute drive innovation from Naraku. Twist Control absorbs the torsion from the converter and even out the loss of power from t...

Complete 19mm aftermarket carburettor (membrane type) with E-choke and jetting. Ready to mount; suitable for 50 and 80cc 4-stroke engines. This is ...

This Variator sleeve replaces the original factory fitted sleeve and collar. This lifts the restricted power. The scooter will be capable of approx...

Low-cost dropping resistor for the lighting system of various 50, 125 and 150cc GY6 4-stroke Kymco and Chinese-built scooters. (5 Watt / 5 Ohm &...

Naraku unrestricted racing CDI for Kymco 4-stroke scooters. Only replaces the original unit and makes a suitable spare replacement. On Kymco Agilit...

Set of 3 Naraku clutch springs for original clutches. 3 different strengths. Engagement point RPM alters in accordance with the value on the spring...

Brake shoe set with ribbed surface. The ribbed section prevents the over-accumulation of brake dust deposits, which generally lead to glazing and a...

Exhaust manifold gasket for all Chinese-built 4-stroke and Kymco 50cc 4-stroke vehicles. Also suitable for all Naraku 4-stroke tuning cylinder kits...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Replacement front left indicator glass for Kymco Filly 50 and all Chinese-built 4-stroke scooters like the Rex RS450, Baotian BT50QT-9, Benzhou Cit...

Recoil spring for kickstarter levers on all Peugeot and Kymco engines.

Variable tuning set for original variators and almost all tuning variators. The Speed-up shims can influence the length of the sleeve: an extension...

The latest version of the Polini Evolution clutch. The 3G ForRace now has 3 clutch blocks for more powerful action. Adjusting the clutch engagement...

Standard Chinese-built-made spark plug as originally factory-fitted. Matches NGK CR7HSA.

Brake shoes with reinforced compound for excellent wet weather performance. Supplied with a set of new shoe springs. Size: 110x25mm Generally for r...

Aluminum Kickstarter [Light] suitable for Minarelli and Peugeot engines.

NARAKU performance quality piston set. Suitable for all GY6 50cc cylinders [39mm bore]. The NARAKU piston has a molybdenum coating to reduce wear a...

Naraku Sports Contra Spring V.2 Pack, +1000, +1500, +2000 rpm The current version of the Naraku counter pressure spring uses a modified alloy sprin...

CNC-machined aluminium intake manifold spacer from NARAKU. The Naraku Jet Flow spacer is designed to optimize flow in NARAKU 51mm cylinder heads. T...

The rectifier/controller changes the voltage from the alternator into the DC for the on board computer, 12V, and keeps the voltage within a certain...

Naraku performance fan for tuned engines. Also for untuned engines. For AC engines, we recommend an additional air scoop. Please pay attention to t...