Motoworx

Aluminium-machined height adjuster set. 37mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

Aluminium-machined height adjuster set. 37mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

3 Set of sliders for the Naraku HS and HS-Racing variators for scooters with Minarelli and CPI engines.

Aluminium kickstarter Light suitable for Minarelli and Peugeot engines. Titanium colour.

Kick-starter, straight design with solid kicker head. Approx. 14cm. Please measure, as there may be clearance issues with the variator cover. Suppl...

Self-locking nut M14x1.50mm for rear wheel shaft (central nut for rear wheel). Also for other Minarelli engines and other models with M14x1.50mm th...

Complete starter clutch. The counter piece of the electrical starter is responsible for uncoupling the starter once the engine is running. If this ...

Complete shaft seals for Minarelli engines. Contains 6 seals incl. 2x shaft seals for the rear convertor.

Magneto rotor for Minarelli-based 2-stroke engines. Also suitable for, among others, Keeway, CPI Generic, Longjia, Mawi etc. There are currently 3 ...

Cylinder gasket set for 50cc air-cooled Minarelli engines. Suitable for original and aftermarket 50cc cylinders.

Replacement star washer / shim from Naraku for securing the outer variator pulleys. Corresponds to the size and design on the original. For all hor...

Counterpressure spring mounting tool for convertor units up to 125mm outer diameter.

Replacement piston for the 70cc original and 70cc NARAKU Sports V.2 Cylinder (NK100.31). Delivered as shown with piston rings, gudgeon pin and circ...

Brake pads with organic composition. This coating mixture is generally used by the original scooter manufacturers as the OEM part. Solid brake perf...

Naraku complete alternator stator for horizontal Minarelli engines. Attention! Not for Minarelli engines with Ducati ignitions.

Petrol cap centre fairing in silver. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Black pillion cover / petrol cap surround centre fairing for QT-9. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Lower left side fairing in silver. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Silver coloured headlight surround fairing. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Lower front cover fairing in Black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Low-cost, standard brake shoes. Supplied with a set of new shoe springs. Size: 110x25mm Generally for rear brake use, but can be used for front on ...

Carbon Power reeds for original reed blocks for scooters with Minarelli engines. Kinder to engines if they break-up. 2x carbon reeds supplied. Chea...

Rectifier / Controller changes the AC into DC on a 12V board. This prevents bulbs from burning out. Exposure to high temperatures means bulbs often...

Latest variator technology from Polini for untuned 50cc engines for improved acceleration and higher top speed. Polini evo sliders make for better ...

Scooter tyre innertube with 90° bent valve for easier pressure checks. Our Tip: Always replace the innertube when changing the tyre. Suitable for ...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower opera...

PRO-X is the most cost-effective shock in the YSS range. Double-action damping system with adjustable spring preload (tool included). Progressive d...

Malossi MHR intake manifold with short opening and straight connection. 22/28mm variant has a 22mm opening and the 28mm carb connection for MHR Tea...

Malossi 45° MHR Racing performance reed block with 2 single-piece reeds. 0.3mm for improved gas flow. Straight from the Malossi MHR racing departm...

Malossi large pore sports air filter. Great filtering performance in fire-resistant foam.For optimal performance when used on the road, we recommen...

Naraku Sports Contra Spring V.2 +200rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better res...

The bigger brother to the Naraku Racing Variator: the Naraku High Speed Racing V.2. The variator surface has been blast-hardened with glass beads, ...

M10x1 nut for clutch bells for all Minarelli and Minarelli-based engines.

Buzzetti universal 3-point puller for alternator rotors. The 3 screws included in the delivery are simply screwed into the holes in the rotor. Then...

Plastic fan wheel air cooling for CPI, Keeway, Generic, Mawi, Longija and other Chinese-built 2-stroke engines.

Little end bearings for Minarelli/Morini engines with 10mm gudgeon pins.

Complete tail light bulbs included. E-certificate. Suitable for all Chinese-built 4-stroke vehicles with vehicle design like the Rex RS450, Baotian...

Kevlar belt from Polini. The most durable v-belt Polini offers has additional aramid fibre inlays that make this belt extremely resistant to tearin...

Polini Speed Clutch Bell. Better design than most original clutches and thus an ideal replacement for died down or misshapen originals. The improve...

Tuned engines generally develop their power higher in the rev range and the engine can lose performance at lower revs, meaning poor drive. To comba...

Naraku Sport-o racing clutch. Solid sports clutch that engages 1500-2000 rpm higher than standard, meaning better drive and traffic light starts. K...

Naraku Sports Contra Spring V.2 2 Pack, +1000, +1500 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring pro...

It is very easy to lose petrol caps! At the petrol station, broken keys or just dropped never to be found again. Instead of buying a new set of key...

Hand brake cylinder with lever and brake light switch for front disc brake systems. Suitable for all standard production handlebars 22mm.

Front steel-braided hoses for disc brakes. Steel braided hoses are brake hoses, surrounded by a woven steel jacket. The advantage over rubber lines...

Brake light switch for drum brakes with cable. The switch sits on the brake fitting. To avoid errors when ordering, please check the product image....

Left-hand handlebar switchgear for scooters with integrated high and low beam, indicator switch and horn. Please check the product image, as variou...