Motoworx

Pressure-activated petrol tap with M16 thread for GY6 scooters with metal tanks. Delivery also includes the small pre-filter pipe that sits in the ...

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

This regulator is similar to the NARAKU ignition coil. The controller reaches a significantly higher output than the standard controller by ensurin...

Naraku V.3 carburettor 18.5mm for 50cc 4-stroke scooters. Top quality at an affordable price. No start issues as with Chinese alternatives and good...

Complete petrol gauge (fuel gauge) for metal fuel tanks. Suitable for all vehicles with a metal fuel tank.

Very low-cost intake manifold for derestricting the inlet port. This increases the size of the opening to 21mm. This is a must when using a larger ...

Vacuum-operated fuel tap for various scooters with Piaggio engines. Fitment diameter in tank: 15mm

Malossi piston ring set for all 70cc Malossi sports cylinder for Minarelli and Morini AC + LC engines. Suitable for all 70cc Malossi pistons with 2...

NGK is one of the world’s leading spark plug manufacturers. As the factory-fitted choice of many vehicle brands, NGK is there when the spark star...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Naraku small end bearing [HD-Quality] - 10x14x13. Suitable for Minarelli and Morini engines with 10mm gudgeon pin.

Complete replacement 24mm carburettor (membrane type) supplied with electric auto choke. Ready to fit and suitable for 125/150cc Chinese-built engi...

E-choke mounting plate.

This aftermarket air box is identical in design and construction to the original. Low-cost replacement for defect items or for returning to origina...

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Complete steering bearing sets including bearing races, ball bearings and locknuts. Bearing set for 27mm fork bridge.

Naraku Sports Contra Spring V.2 +1000 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better r...

Some scooters are sent from the factory with two rear shock absorbers. These models mostly use aluminium exhaust systems. These are generally mount...

Repair kit for 24mm Naraku carburettors. Comes with adjustable needle, needle clip, main jet, pilot jet, float bowl gasket, idle jet, mix adjuster ...

Aftermarket carburettor for all 2-stroke scooters with 1E40QMB engines. Minarelli replica air-cooled. Comes with electric choke. Note: In rare case...

Naraku sport clutch spring set for all Minarelli original and Naraku sports clutches. 3 different graded spring rates supplied, with the rpm value ...

Complete front left indicator, orange. With E-certificate. Suitable for all Chinese-built 4-stroke vehicles in the same design as the REX RS450, Ba...