Motoworx

Naraku performance fan for tuned engines. Also for untuned engines. For AC engines, we recommend an additional air scoop. Please pay attention to t...

Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Wh...

CNC milled Naraku racing clutch bell with 107mm inner diameter. The advantage of using this over the stock bell is the extremely low tolerance and ...

Cost-effective 17.5mm carb from Naraku for Minarelli and Minarelli-based engines (Chinese versions) and horizontal Peugeot engines. Leaves nothing ...

Naraku CNC-machined racing clutch bell for Kymco, Honda and Chinese-built maxi scooters. Ensures vibration-free running and the cooling grooves hel...

Many scooters from the middle East use different types of carburettor. The carb is a Mikuni copy, but uses an E-choke/cold start valve. You can onl...

For technology-inspired tuning freaks we offer this reinforced GY6 Racing crank with a 2mm longer stroke. This is a no-frills product. 4-stroke pro...

Complete cylinder kit with all gaskets and small parts for fitting. This 150cc Naraku cylinder yields engine performance corresponding to the origi...

Reinforced starter motor freewheel without starter sprocket, from Naraku. The starter mechanism is subjected to higher loading where engines have h...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

3 Set of sliders for the Naraku HS and HS-Racing variators for scooters with Minarelli and CPI engines.

Replacement star washer / shim from Naraku for securing the outer variator pulleys. Corresponds to the size and design on the original. For all hor...

Replacement piston for the 70cc original and 70cc NARAKU Sports V.2 Cylinder (NK100.31). Delivered as shown with piston rings, gudgeon pin and circ...

Naraku complete alternator stator for horizontal Minarelli engines. Attention! Not for Minarelli engines with Ducati ignitions.

Naraku clutch spring set for 125/150cc original and Naraku sports clutches for GY6, Kymco, Honda, Malaguti, Keeway Maxi scooters.+1500 rpm +2000rpm...

Naraku Sports Contra Spring V.2 +2000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku sports clutch. Solid sports clutch that engages 1500-2000rpm higher than standard, meaning better drive and traffic light starts. Fiber rein...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower opera...

Naraku Sports Contra Spring V.2 +200rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better res...

Naraku Sports Contra Spring V.2 +2000RPM The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

The bigger brother to the Naraku Racing Variator: the Naraku High Speed Racing V.2. The variator surface has been blast-hardened with glass beads, ...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower opera...

Naraku racing CDI for improved performance and speed. Simply swap for the original unit. You can get rid of your restricted factory-fitted CDI. Att...

NARAKU replacement piston set for 47mm cylinders. The piston has a CNC-machined oil grooves for enhanced lubrication at the piston skirt. The pisto...

Naraku Sport-o racing clutch. Solid sports clutch that engages 1500-2000 rpm higher than standard, meaning better drive and traffic light starts. K...

Naraku Sports Contra Spring V.2 2 Pack, +1000, +1500 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring pro...

Chrome flywheel fan cover for the 139QMA/QMB 50cc 4 stroke engines. This product is a nice upgrade or replacement for any broken cover.

Complete cylinder gasket set for all 47mm Naraku 4-stroke cylinder sets Kit contains all necessary gaskets from the base upwards and is exactly sui...

NARAKU Racing intake manifold for GY6 and all GY6-based models, as well as Honda Monkey and Monkey replica engines. The intake manifold has a passa...

Tuning CDI unit with no rev limiter from Naraku. Derestricts your scooter and makes it revvier. Check the connectors in the product image for accur...

Naraku puller for alternator magnet wheels. Screws onto the existing rotor thread and is tensioned with the tensioning bolt. Light taps with a hamm...