Motoworx

Easy to tune variator from Top Racing. The variator can be used with original belt. Supplied with unrestricted vario sleeve and 3 sets high quality...

Aluminum Kickstarter [Light] suitable for Minarelli and Peugeot engines. White

Alternator rotor puller for Aprilia models with Aprilia engines, Suzuki, geared mopeds and horizontal cylinder Minarelli engines. alternative to st...

Locking spring for kick-starter carrier sprockets.

M10x1.25 nut for the rotor on the alternator. Suitable for Minarelli engines and other models using the same size nut. Thread on the rotor side of ...

Kickstart gear for upright and horizontal Minarelli and Minarelli-based 2-stroke engines as found in CPI, Keeway, Mawi, Longija etc.

Recoil spring for kickstarter levers on CPI, Keeway, Generic and Minarelli-based Chinese-built 2-stroke engines.

Replacement reed valve gasket for horizontal 50cc 2-stroke Minarelli engines and Aprilia/Suzuki engines. Please check that a gasket is required on ...

Aftermarket oil pump in original design and flow. A defective oil filter can cause seizing, or damage the crank and bearings. Such a small part mak...

Great price cylinder kit for horizontal air-cooled Minarelli engines. The cylinder kit is identical in size and performance to the original, making...

Universal handlebar grip for scooters, motorcycles and quads/ATVs with 22mm diameter handlebars. outer length: 120mm inner length: 115mm

Handlebars for all scooters with bodywork like the Rex RS450, Baotian BT50QT-9, Benzhou City Star etc. As there are different variations of handleb...

Complete engine gasket set for 50cc GY 139QMB/QMA engined scooters with 12” wheels or larger; v-belt length 788mm, crank-gearbox input shaft 28cm...

CDI attachment rubber for ignition boxes 37x22mm on 4-stroke Chinese-built scooters.

Rotor/magnet wheel for alternators. Alternators are currently available with 6 or 8 coils. Please check your original item to check which one you r...

Complete engine gasket set for 125/150cc GY6 engines (152QMI). Contains all relevant gaskets. Cheaper than individual purchasing. Does not include ...

The rectifier/controller converts the alternating voltage from the alternator into the DC for the on board computer. This keeps the battery charged...

Bolt and nut set for Chinese-built 2-stroke scooters, Keeway etc. with almost all bolts, oil draining plugs, nuts, cylinder studs etc. Ordering ind...

15mm gudgeon pin circlips from Naraku. Ensure the clip groove is clean and will allow the circlip to seat properly. When installing, we recommend o...

Variator back plate for GY6 125/150cc 4-stroke Chinese-built engines. This component corresponds to 100% of the original. Only for 15 mm tail shaft!

Vacuum-operated fuel tap for various Kymco and SYM scooters. Securing nut thread: M16x1.5mm Only for scooters with metal fuel tanks!!! OEM-quality.

These Speed-up shims influence the length of the variator sleeve. Lengthening can improve acceleration and shortening can increase top end speed. M...

Variable tuning set for original variators and almost all tuning variators. The Speed-up shims can influence the length of the sleeve: an extension...

Exhaust heat guard. Often becomes damaged in a spill and changing it will refresh the look of your machine. Delivery is for 1 head guard in black.