Naraku

This Naraku cylinder gasket set contains all necessary gaskets from cylinder base upwards. Can be used on Naraku 4-stroke cylinders (NK600.52), but...

Good quality 17.5mm carburettor from Naraku for Piaggio engines. Great alternative to those expensive top end brands with no compromise on quality...

10mm gudgeon pin circlips from Naraku. Ensure the clip groove is clean and will allow the circlip to seat properly. When installing, we recommend o...

Set of Naraku M6 main jets for Dellorto carburettors. Comes with 10 jets in 0.02mm increments. Set contains 90-108. M6 main jets are generally used...

Set of Naraku M6 main jets for Dellorto carburettors. Comes with 10 jets in 0.02mm increments. Set contains 70-88. M6 main jets are generally used ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Cylinder studs including special nuts with M6 thread for securing the cylinder. Set of 4 with nuts. Length: 110mm, nuts are 13mm in length and have...

Replacement M6/M7 threaded studs for mounting exhaust systems to the cylinder etc. Set contains 10 studs.

The Naraku 50cc cast iron cylinder is a an affordable and robust alternative for those who are looking for a replacement top end due to cylinder or...

Variable tuning set for original variators and almost all tuning variators. The Speed-up shims can influence the length of the sleeve: an extension...

The Naraku 50cc cast iron cylinder is a an affordable and robust alternative for those who are looking for a replacement top end due to cylinder or...

The NARAKU 50cc cast iron cylinder kit is an affordable and robust alternative for those who require a replacement due to cylinder or piston damage...

NARAKU sports variator for Morini engines. When calibrated, this variator provides good acceleration at higher top speeds. The restriction of the o...

Naraku small end bearing [HD-Quality] - 12x16x13. Suitable for Minarelli and CPI, Generic, Keeway, Chinese-built 2-stroke engines with 12mm gudgeon...

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku AC unrestricted Racing CDI with with improved/advanced mapping for GY6 50/125/150cc 4-stroke Chinese vehicles. Attention: NOT for REX, Qingq...

NARAKU performance quality piston set. Suitable for all GY6 50cc cylinders [39mm bore]. The NARAKU piston has a molybdenum coating to reduce wear a...

Naraku Sports Contra Spring V.2 Pack, +1000, +1500, +2000 rpm The current version of the Naraku counter pressure spring uses a modified alloy sprin...

Naraku Sports Contra Spring V.2 Pack, +1000, +1500, +2000 rpm The current version of the Naraku counter pressure spring uses a modified alloy sprin...

CNC-machined aluminium intake manifold spacer from NARAKU. The Naraku Jet Flow spacer is designed to optimize flow in NARAKU 51mm cylinder heads. T...

Naraku M4 main jet set, 10-piece. Jets: 80-82-84-86-88-90-92-94-96-98 - cheaper option than individual items. For NK200.01 carb. Not suitable for K...

Naraku Sport-o racing clutch. Solid sports clutch that engages 1500-2000 rpm higher than standard, meaning better drive and traffic light starts. K...

Twist Control: an absolute drive innovation from Naraku. Twist Control absorbs the torsion from the torque driver and even out the loss of power fr...

Tuning CDI unit with no rev limiter from Naraku. Derestricts your scooter and makes it revvier. 2009 V.2 unit adds the extra few mph that a big bor...

Outer variator pulley from NARAKU. The pulley corresponds to the shape and dimensions of the original. A cost-effective alternative when pulleys ar...

Naraku HD (Heavy Duty) crank main bearing set. Set contains left and right crank bearings with metal cage and relevant shaft seals. For upright-eng...

High-torque 70cc NARAKU cylinder kit. This cylinder kit is not designed to be revvy, but rather it shows its strengths in the lower range. Just abo...

Complete cylinder gasket set for all 39mm Naraku or original 4-stroke cylinder sets. Kit contains all necessary gaskets from the cylinder base up a...

Cylinder gasket set 48mm for the Naraku 48mm cylinder kit Set contains base gasket, cylinder head gasket and exhaust manifold gasket. Also suitable...

Naraku electrical choke for all Chinese-built 4-stroke carburettors on Kymco, Peugeot, Piaggio, Yamaha and MBK. The choke can simply be swapped wit...

The Naraku 50cc cast iron cylinder is a an affordable and robust alternative for those who are looking for a replacement top end due to cylinder or...

High-quality replacement piston for 50cc original and 50cc Naraku cylinders for Kymco, SYM and Honda engines. Delivery as shown, including: piston ...

Naraku unrestricted CDI for Fever ZXII, KB50, Heroism, Curio Models and SYM with upright cylinders (double connector CDI). Now the Fever ZXII can b...

Naraku performance fan for tuned engines. Also for untuned engines. For AC engines, we recommend an additional air scoop. Please pay attention to t...

Naraku unrestricted tuning CDI. Opens up the engines rev potential. Simply swap for the original without messing with wiring. Only for use where a ...