Phoenix 150 4T

Grinding and mechanical noises when starting the engine are often a sign that the starter clutch is faulty. The carrier sticks and no longer releas...

Complete steering bearing set for 125/150cc 4-stroke Chinese-built scooters The manufacturer used a tapered roller bearing as the lower bearing and...

Complete oil pump for 125/150cc GY6 engines. Delivery as shown.

Standard camshaft for 125cc and 150cc GY6 engines as originally factory-fitted.

This intermediate transmission shaft is supplied pre-pressed. Same number of teeth as the original 13/42 teeth.

Primary gear shaft for Chinese 125/150cc scooters with the 152/157QMI engine. This is where the clutch is mounted. This gear has 15 teeth as per or...

Gearbox output shaft - long version. For rear wheel mounting. Total length: 197mm, used for vehicles with additional swinging arm on the right-hand...

Isolator between carb and intake manifold.

Brake light switch for rear disc brakes on GY6 50/125/150cc Chinese-built scooters with rear disc brakes.

Original intake manifold for all GY6 125/150cc 152/157QMI engines. Delivery includes clamp and O-ring. 24mm opening.

Folding kickstarter lever for 125/150cc GY6 4-stroke Chinese-built engines.

Standard CDI ignition unit as factory-fitted.

Complete timing chain tensioner suitable for 125/150cc GY6 Chinese-built 4-stroke engines. Delivery includes tensioner tool, which is only to be us...

Crank seals for 125/150cc GY6 4-stroke engines. Set contains 4 seals for left and right-hand side, as well as for the gearbox output shaft.

Replacement aftermarket clutch bell. Already blued clutch bells tend mean slipping and deforming of the plates. This means the bell cannot run true...

Aftermarket front brake disc. 3-point mounting and external diameter of 220mm. Supplied as shown.

Complete front brake calliper for 125/150cc Chinese-built GY6 scooters, incl. brake pads. Those callipers are factory-fitted as either 1 or 2 pisto...

Oil strainer bolt for GY6 50ccm 139QMB/QMA and 125/150ccm 152/157QMI 4-stroke engines.

Oil strainer 50cc GY6 139QMB/QMA engines and 125/150cc GY6 152/157QMI.

Oil strainer spring for all 50cc GY6 139QMB/QMA 4-stroke engines and 125/150cc 152/157QMI.

Complete hydraulic system for disc brakes on GY6 125/150cc Chinese-built scooters with rear disc brakes. Set includes: hand brake cylinder with lev...

Hand brake cylinder with lever and brake light switch for front disc brake systems. Fits all standard 125/150cc GY6 Chinese-built scooter handlebars.

This brake system consists of a hand brake cylinder (hand brake pump) with lever, hose, calliper with pads and brake light switch. The brake system...

Steel-braided hoses for 125/150cc Chinese 4-stroke scooters with rear disc brake. Steel braided hoses are brake hoses, surrounded by a woven steel ...

Rear brake line for 125 and 150cc 4-stroke Chinese scooters with rear disc brake. The design matches that of the standard system. For added assuran...

Complete kit of all variator components for all 125cc or 150cc GY6 4-stroke Chinese-built 152/157QMI engines. The kit contains a variator, a set of...

Complete rocker mechanism including all individual parts ready fitted. For all GY6 125/150cc 152/157QMI engines.

Valve cover for cylinder heads without SLS. For all GY6 125/150cc 152/157QMI engines.

Complete crank with bearings. Standard replacement crank for all 125 and 150cc GY6 4-stroke engines e.g.: Baotian, Rex, Peugeot Zoom Up, Keeway etc.

Replacement drive belt suitable for GY6 125/150cc engines with short blocks. Dimensions: 735-20-30

Brake light switch for front brake discs. Suitable for GY6 50/125/150cc Chinese-built scooters.

Oil dip stick for GY6 50ccm, 125cc and 150cc engines. Includes O-ring.

Complete engine gasket set for 125cc GY6 engines with 743mm v-belts (152QMI engines). Set contains all the servicing-relevant gaskets: a cheaper op...

Crankcase breather system by Naraku. A Simple, yet effective design by Naraku suitable for all 139QMB/QMA (GY6 50) Kymco and GY6 125- 180cc 4- stro...

Naraku Racing Variator for all GY6 engines with 125cc or above. Set comprises: variator, variator pressure plate, 10.3g sliders, CNC-machined outer...

Centre stand spring (galvanized steel). Length: 85mm Width: 15mm Wire Size: 3mm

Side stand spring (galvanized steel) Length: 90mm Width: 15mm Wire Size: 2,5mm

Standard brake line for front disc brakes which are factory fitted. Suitable for all vehicles with front brake discs. Length: 92cm, meaning it can ...

160cc big bore kit for GY6 125/150cc + engines. The bore is 58.5 mm. Kit is suitable for all air-cooled 4 stroke 125-150cc Kymco engines (scooters)...

Sports camshaft with altered timing for original and sports cylinder heads. For 4-stroke air-cooled 125-180cc Chinese imports (quads, scooters, Bug...

Naraku sports camshaft for original and sports cylinders. Longer valve opening time. Suitable for Chinese import 125/150cc scooters, quads etc. wit...

Tuning cylinder head with larger valves, larger ports and an enlarged 59mm combustion chamber. The cylinder head fits the NARAKU tuning cylinder se...

180cc big bore kit for GY6 based engines over 125/150cc. The bore measures 63 mm. Kit is suitable for all air-cooled 4 stroke 125-150cc Kymco engin...

170cc big bore kit for GY6 based engines over 125/150cc. The bore measures 61 mm. Kit is suitable for all air-cooled 4 stroke 125-150cc Kymco engin...

High-tech straight from the lab, Iridium spark plugs are a quantum leap in engine performance. We offer these plugs from Japanese manufacturer Band...