Typhoon 50 USA

Naraku cylinder head studs for Piaggio cylinders. Great as a replacement for broken or damaged studs. Individual stud. The stud is 110mm long with ...

24mm connector boot for Arreche carbs with clamping flange.

23mm connector boot for Arreche carbs with clamping flange.

Naraku Sports Contra Spring V.2 +2000RPM The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Tuned engines generally develop their power higher in the rev range and the engine can lose performance at lower revs, meaning poor drive. To comba...

Well priced racing clutch with lighter clutch shoes. Weight saving means engagement at higher revs. Harder clutch springs. A lower quality sports c...

Naraku Sport-o racing clutch. Solid sports clutch that engages 1500-2000 rpm higher than standard, meaning better drive and traffic light starts. K...

Polini EVO II Speed Bell is lighter and more revvy than the previous model. The single-piece clutch bell is CNC-machined from a single block, unlik...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower opera...

The Vicma Evo Racing and Hebo clutches are identical settings in principal. The Hebo differs mainly in the clutch linings. 3 Shoe clutch with varia...

Complete ignition kit from tuning expert Top Performances. The kit includes a racing ignition coil with silicone plugs, an alternator shim with off...

Dellorto 17.5 mm carburettor for scooters with Piaggio engines. Recommended even for untuned engines as the carburettor is easier to tune than the ...

Quick and simple replacement lever for broken or damaged clutch or brake levers. 100% match of the original shape, colour and mount. Single lever i...

OEM quality small end bearing (12x17x13mm) by the Portuguese manufacturer Top Racing. Suitable for use in original and slightly tuned engines.

Woodruff key with blunted edges for scooters with 50-180cc Piaggio 2-stroke engines. length=12mm, wide=3mm, high=5mm

Set of 3 sliders for Malossi Multivar variators. Sliders should be replaced to avoid damage. Not suitable for Piaggio MHR variators.

The Polini Hi-Speed offers a combination of improved pull you can feel and a higher top speed. Contains well-engineered with 2 sets of variator wei...

Malossi Multivar variator for great drive and shifting, as well as increased top end. [computer-optimized running surface] Original drive belt can ...

Malossi Multivar variator for great drive and shifting, as well as increased top end. Original drive belt can be retained. Excellent Malossi qualit...

MHR (Malossi Hyper Racing) Team products are pure racing components. Large diameter variator for use with overrange drive belt and convertor for ex...

Malossi MHR variator especially for older Piaggio models up to 1998. 16x13 weights with special surfaces as on the larger 19x15.5g versions. MHR te...